Swatchless

I’ve met a kindred spirit this spring….someone who gets excited giddy at the idea of creating yarn and knitting with it.  Last week I showed her how to spin with a drop spindle, and the next thing I know she has talked with a sheep farmer and negotiated the acquisition of several large bags of fleece.

She asked what to do with the fleece, how to make it into yarn.  I let her know that there are 4 main steps

1. Wash the fleece
2. Card the fleece into a batt
3. Spin the batt
4. Dye it (this can be done any time after it is washed)

She went home and washed some of the fleece and dyed it with onions and tea and beans.  Later next week we’ll have a carding lesson.

Washing Fleece

Basically, fill up a bathtub/basin with warm soapy water, and put the fleece in.  Let it sit.  The water will change colour as the feces and grease leaves the fibers.  You may need to refill the tub a few times until the water stays clear (like in the picture).

• Never agitate fleece when it is in the soapy water or it will felt
• Never change the temperature rapidly
• Put a bathtub strainer on the drain so the fleece wont end up down the drain.

relatively clean fleece

After the fleece is washed, it will need to dry.  Hopefully it is a sunny day, and you have a clothesline!  Do not try to do anything with the fleece until it is completely dry.

After it is dry, it is time to card it, and spin it….and the fun begins!

locks, roving/batt, yarn

I made a smart purchase of a drum carder (from E-Bay) in 2008, and my wrists have been thanking me since.  Before that time I had used a dog brush, and using that gave me some kind of carpal tunnel issue.  Be warned!!

Carding Fleece

I’m always learning how to do this better, and the most recent improvement that I’ve made to my process is to add fleece directly to the drum to start with.

The big drum is where the carding happens, it is driven by the handle.  The little drum is rotated slowly when the big drum rotates.

Add the fleece, lock by lock to the drum until you have the entire drum covered.  It is important that all the fibers are lined up in the same direction.

Rotate the big drum around a few more times.

Use a knitting needle (or chopstick) to lift the fibers from the big drum.  Start this process where there’s a break on the drum.  Lift about an inch at a time.

Wind the big drum backwards, and use the chopstick/knitting needle to take the fleece off.

Split the fiber batt in half lenthwise, and feed it into the drum carder from the tray.

Card the fleece 2 or 3 times until it is as smooth as you want it.

3rd time carded

Here’s the batt, ready to spin.

There are still little noils or nubbly bits in the fleece.  I’m not sure how to eliminate those.  Let me know if you do!